The fibersect.multi® mechanically cuts off the protruding epoxy and fibers of all ferrules and connectors, including MT ferrules and MTP® connectors and single fiber connectors and ferrules

HOW 
• Simple, one button operation 
• Fast, 1-4 second cut cycle time 
• Adjustable cut length, cuts parallel to the face of the ferrule 

WHY 
• Increases throughput by significantly reducing core cracks 
• Eliminates: scoring/cleaving, denubbing, air polishing 
• Significantly reduces final polishing steps 
• Flat cut improves polished end face geometry 
• Preserves ferrule length – provides tighter control over spring force 
• Minimizes polishing by cutting close to ferrule 
• Easy-change adapters enable cutting of all ferrules and connectors 

SPECS 
Processing time: 1-4 s 
Ferrule/Connector adapters: MT 0°/MT 8°/LC/LC-APC/LC-Duplex/SC/SC-APC + others 
MT ferrule capabilities: 4 to 72 fibers 
Adapter changeover time: 30 s 
Allowable fiber protrusions from ferrule: 0 to 10 mm 
Cut length: adjustable, 0-600 μm from face of ferrule 
Cut flatness: +/- 10 μm 
Options: vacuum dust collector, cut counter, foot switch 
Power supply: 100-240 Vac, 50-60 Hz + rechargeable battery powered 
Dimensions (W x D x H): 4.25 x 5.75 x 3 in. (108 x 146 x 76 mm) 
Weight: 2 lbs (0.9 kg)