Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (EPFU) and micro/nano cables, from 0,8 to 6,5 mm into duct from 3 to 16 mm. A full digital control system with softstart, electronic fiber security, memory functions combined with a 200 N powerful motor makes the machine very flexible and effective to use. Can be operated directly from its case.

JETTING V0 HD FEATURES & SPECIFICATIONS
• Electrically operated. Battery connected. Optional power supply.
• Allows installation in a larger duct with a smaller compressor.
• Electronic stopping/slipping protection within 250 ms.
• Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
• Forward and reverse function
• Display for current speed, distance, pushing force pressure and duct air temp.
• Max. speed: 110 m/min.
• Stepless pushing force on cable up to: 200 N.
• Adjustable clamping force.
• Works with JetLogger.
• 110/240 V Power supply. No need to charge or change batteries
• Table bracket. For safe installation on working table.
• Jetlogger. Electronic documentation system.
• Metal drive wheel for < 2.5 mm cabel.
• Softstart: Enables an even smoother start protecting the fiber.
• Memory: The last inserted data like pushing force will stay in the memory even if the device will be switched off or the battery need to be exchanged.
• Service info: Memory of total milage/distance since machine taken into operation.
• Duct air temp: Display showing the air temperature injected into the duct.